The Choice is Easy...
Trust the Folks at Carr!

Product Catalog

  • Manufacturer: Airman
  • Model Number: 185cfm

Tow Behind

  • Manufacturer: Barreto
  • Model Number: 1324-ST

Walk-behind, 36" trencher bar, discharge auger, Honda GX390 engine. These 900-lb. steerable, walk-behind trenchers feature precise wheel control to help eliminate drifting, making them well suited for trenching uneven terrain or hillsides.

  • Manufacturer: Bosch Power Tools
  • Model Number: BH2760VC

15 Amp, 120V Demolition Hammer

  • Model Number: 1942

14.3 Amps, 115 Volt Heath Gun

  • Manufacturer: Bobcat

Bobcat Fork Attachment

  • Manufacturer: Bobcat
  • Model Number: E335

Rubber track compact Excavator

  • Manufacturer: Bobcat
  • Model Number: E35

Rubber track compact Excavator

  • Manufacturer: Intec
  • Model Number: K81018

Intec’s highly portable Cyclone processes over 800 pounds of cellulose or 200 pounds of fiberglass per hour while weighing only 142 pounds with our recently enhanced aluminum airlock. This system provides ease of transportation to the job site, in addition to timely installation of attic insulation – less than 1 hour to install R-19 cellulose and under 1-1/2 hours to install R-19 fiberglass in a 1000 square foot attic

  • Manufacturer: Van Mark
  • Model Number: MM1050

10'6" aluminum siding brake

  • Manufacturer: Terramite
  • Model Number: T5C

Compact Backhoe Loader

  • Manufacturer: Multiquip
  • Model Number: GB12BW

GloBug Solo Stand 360 Degree Glare Free Light

  • Manufacturer: Jet
  • SKU: 724656
  • Model Number: 441320

JET 20-Ton Capacity SJ Series SCREW JACK -- Contractor quality mechanical jack for all-purpose lifts and supports. Holds heavy loads indefinitely - will not creep. Heavy-duty bell shaped cast base. Less effort required to lift capacity load with new design. Corrugated steel swivel head turns easily under load. Easy to carry and position with built-in handle. Compliance: ANSI/AMSE B30.1 standards
Turning bar is optional. See True Value # 724607

  • Manufacturer: Hilti
  • Model Number: 372224

Diamond Coring Tool DD 130 (BI)

  • Manufacturer: Hilti
  • Model Number: 3468967

TE 3000-AVR Performance Package (Tool only + 2 Chisels)

  • Manufacturer: Hilti
  • Model Number: 3468966

TE 3000-AVR Performance Package with Cart

  • Manufacturer: Hilti
  • Model Number: 248739

Breaker TE 1000-AVR 120V

  • Manufacturer: Hilti
  • Model Number: 3468367

TE 70-ATC Performance Package(Fixed) 120V TPS

  • Manufacturer: Hilti
  • Model Number: 228085

Rotary Hammer TE 2 120V Case

  • Manufacturer: Hilti
  • Model Number: 248739

Breaker TE 1000 - AVR 120V